Epoxy Damp Proof Membrane 8kg

Images for illustration purposes only Epoxy Damp Proof Membrane can be used on new or old concrete and sand and cement floors to hold back damp. Recommended areas of use Concrete floors subject to rising damp New or old concrete floors where a DPM has failed or was never installed Suitable for heavy wear areas Use on areas of damp concrete which cannot be surface dried prior to painting Features 100% solids, high build coating Virtually solvent free liquid epoxy resin damp-proofer Withstands 98% RH Holds back rising damp where a damp proof membrane is either missing or defective Can be over painted after 16 hours with most types of floor coatings If a DPM has failed or perhaps was never installed in the first place, the features of this product will effectively suppress vapour and hold back damp. Curing Times* 10C7-10 hours 15C4-6 hours 20C3-4 hours *Curing times quoted are for touch dry or 'walk on' Overcoating Time - Allow 16 hours at 15C before applying any Watco 100% solids coating such as Epoxicote High Build, Chemi-Coat, Safety Grip, Bund Sealer, etc. Allow 24-48 hours before applying water based products such as Watco Epoxy Gloss Coat or Safety Coat. If more than 4-5 days have elapsed before overcoating, Epoxy Damp Proof Membrane should be lightly abraded to provide a key.

Weight	8kg
Product Type	Epoxy Damp Proof Membrane